Discount Crowd Control

Front and side mounted push pads requiring less than 5 pounds of force to activate that initiate water flow through a flexible hooded rubber bubbler having a nonsquirt feature. An internally mounted valve and adjustable stream regulator shall control water flow between 20 and 90 psig.

Evaporator shall be high efficiency tank type and shall be encapsulated in insulation. R134a refrigeration system shall be hermetically sealed and refrigerant flow shall be capillary tube controlled. An adjustable thermostat having an off position shall control refrigeration system. Stainless steel top shall have integral drain strainer.

Heavyduty galvanized frame shall support powdercoated galvanized exterior panels (standard finish) or stainless steel panels (optional finish).

Potable water system components shall comply with the Safe Drinking Water Act Amendments, the 1988 Lead Contamination Control Act and shall be Certified to NSF/ANSI 61, Section 9. Chilled water capacity shall be rated per ARI Standard 1010. Cooler shall be Listed by Underwriters Laboratories Inc. to U.S. and Canadian safety standards. Drinking water cooler shall comply witn ANSI A117.1 and ADA frontal approach and protruding object requirements.

Model HWUACO8 delivers 8.0 gallons of chilled drinking water per hour.

• Builtin 100 micron strainer stops particles before they enter the waterway
• Waterways are leadfree in materials and construction
• Stainless steel top
• Flexible bubbler guard
• Heavy duty galvanized steel frame
• High efficiency cooling tank and coil
• Refrigerant R134a
• Three push pad activation
• External stream height adjustment

FINISHES:

• Standard Cabinet Finish: Granite powder-coated paint on galvanized steel
• Optional finishes at additional cost: Stainless Steel.

Cooling Capacity: 8.0 GPH (30.3 LPH)

115 Volts, 60Hz

Full Load Amps: 4.6

Rated Watts: 460

Glass Filler Accessory Option: Yes

Capacities are at industry standard rating conditions of 50°F (10°C) outlet water, 80°F (26.7°C) inlet water and 90°F (32.2°C) ambient air.

OPTIONS (at additional charge)

• Glass Filler (Factory Installed)

Components in this cooler are lead-free as defined by the Safe Drinking Act Amendments of 1986, and the Lead Contamination Control Act of 1988. Drinking water cooler is Certified to NSF/ANSI 61.

Warranty: (Continental United Sates and Canada only) One (1) year from date of Installation for repair or replacement on parts only. For a further four (4) years the complete hermetically sealed refrigeration system is warranteed.

Export Warranty: One year component parts. Detailed warranty certificate enclosed with each water cooler. All coolers sold and/or shipped outside of the continental United States and Canada have a one (1) year warranty coverage on parts only. No extended warranty on the hermetically sealed refrigeration system is allowed.

Wt. 63 lbs.

21"L x 21"W x 26"H