Discount Crowd Control

Model: HWBFA8L.VRC

Model HWBFA8.VRC vandal-resistant, barrier-free, wall mounted, self-contained, 7.7 GPH, electric water cooler is perfect for commercial and institutional applications. This model features a 14 gauge satin finish stainless steel cabinet with integral basin. The ventilation louvers are covered on the inside by framed stainless steel wire mesh screen which is welded to the inside of the cabinet. Removable front panel is held with stainless steel pinned socket screws. Bubbler is low profile PCP forged brass that is locked to the receptor. Valve is operated by recessed push button. Supply 3/8", waste 1-1/4" O.D. The refrigeration system is balanced to provide low energy usage and a longer life assured by utilizing a high displacement compressor, a counterflow cooling evaporator/chiller, efficient capillary sizing, a large capacity dryer-strainer, and a fan-cooled condenser with maximum heat exchange. A wire service cord and polarized plug are furnished; 115V, 60 Hz. Environmentally friendly R134a refrigerant is controlled by calibrated capillary tube. Capacity is based on ARI standard rating conditions of 80°F inlet water temperature, 90°F room temperature, 50°F drinking water temperature. Model HWBFA8.VRC meets current Federal Regulations for the disabled including those in the American with Disabilities Act. Discount Crowd Control carries drinking fountains, electric water coolers and electric drinking fountains to be lead-free by all known definitions including ANSI/NSF Standard 61, Section 9, California Proposition 65 and the Federal Safe Drinking Water Act. Wt. 136 lbs. 20"L x 20"W x 32"H
	Components: Bubbler Head: Model 5703M, polished chrome-plated forged brass, integral basin shank, shielded, anti-squirt, vandal-resistant bubbler head. Valve: Model 5874, push button activation, front adjustable, front access for strainer cleaning with automatic pressure regulation with fully adjustable flow. Fan Motor: Model HP0003253408, fan motor with self-lubricating bearing for a maintenance-free life. Evaporator Chiller: Model HPC026148-SP, evaporator/chiller design combines counterflow cooling with efficient bonding of the refrigerant and water coils for maximum heat transfer. The all copper construction meets government and commercial sanitation requirements. Employs totally encapsulated construction of high efficiency EPS for maximum insulating characteristics. Push Button: Model PBA7, push button assembly has a polished chrome-plated finish. Thermostat: Model HP0005951371, positive sensing thermostat for controlling temperature of evaporator/chiller storage water. It is factory set at 50ºF. Adjustable + - 5ºF. Compressor: Model HPAA00005, hermetically sealed, positive start 1/5 air compressor with lifetime lubrication and built-in overload protection. System completely sealed after deep evacuation, dehydration, and pressure testing at 250 PSIG. 120V, 60Hz. Accessory: 0006983506 Spanner wrench is used to remove retaining ring for cartridge for 5874 valve assembly, and the VRK5874 kit.
				Model HWBFA8L.VRC
			Options: (Additional costs may apply) Filter: Model 6426, 12" x 2", in-line lead removal element that reduces lead from incoming water supply to levels below 15 ppb for up to 500 gallons. Filter has a maximum flow of .5gpm. Therefore, only 1 bubbler may be operated at a time on dual units.